DWR 100 and DWR 200 are a range of semi-automatic dispensers for self-adhesive labels on rolls. Designed for industrial environments, they are made entirely of steel, simple to use and versatile enough for all types of labels commonly in use. Available in versions for label widths up to 100 mm or 200 mm.
The reel holder, which adapts to all internal reel cores, accepts reels of up to 300mm in diameter, offering an impressive run time.
In the DWR 100 F and DWR 200 versions, the labels are read by two microprocessor-controlled self-learning sensors which can automatically identify the difference in transparency between the label and the paper liner, thus presenting the label almost fully peeled off on the peeler bar. When the label is removed, the next one is dispensed automatically. The control board also allows motor rotation to be stopped when the reel finishes and paper breaks can also be accompanied by an acoustic warning signal.
Power supply: 230 V, or 115 V on request, no separate PSU required
The DWR 100 M and DWR 200 M versions are available for use with transparent labels; they feature an electromechanical sensor which detects the difference in thickness between the label and the silicone liner paper with great precision.
An optional accessory for all models is a presettable electronic counter which counts the number of labels applied or else counts down from a preset number before stopping the label supply.
The battery-operated version makes it possible to work for around 5 hours with no mains power supply, depending on the label size and dispensing frequency.
The battery-operated dispenser does not require a separate battery charger since this is integrated in the control board-the unit will recharge automatically if left plugged in.
DWR LC is the entry-level model of the DWR range, and can be used only with non-transparent self-adhesive labels on rolls.
Low-cost, extremely compact and lightweight, it is suitable for non-demanding jobs.
The label is read by two microprocessor-controlled self-learning sensors which automatically identify the difference in transparency between the label and the paper liner.
|Technical specifications||DWR 100||DWR 200||DWR LC|
|Label width||15-100 mm||15-200 mm||15-100 mm|
|Label length||15-600 mm||15-600 mm||15 150 mm|
|Speed||10-15 metres/minute||10-15 metres/minute||5-10 metres/minute|
|Reel diameter||300 mm||300 mm||150 mm|
|Mandrel diameter||38-110 mm||38-110 mm||40-76 mm|
|Power supply||230 Vac - 50 Hz||230 Vac - 50 Hz||24 Vcc|
|Power draw||30 W||30 W||30 W|
|Dimensions||297 x 410 x 400 (H)||376 x 410 x 400 (H)||173 x 233 x 280 (H)|
|Weight||9,7 Kg||11 Kg||4 Kg|
DWR DISPENSER – 100 FC